65Basic OperationSelecting an Alternate Airport1. Press FN and then PROC to go to the Procedure Mode.2. Press the Select key next to the Alternate airport.3. Next, press the Load key to load the alternate to the destination airport into your flight plan. \4. If you want to choose a different Alternate airport, press Modify, choose another airport with theLarge and Small knobs and press Menu/Enter. If you do not have an Alternate airport, select one bypressing Modify and select one with the Large and Small knobs followed by pressing Menu/Enter.5. Insert any waypoints, or airways, for the diversion and then press EXEC.NOTE: When you execute the changed plan, you will not have an active leg until you activatea new flight plan leg with either the FlyLeg, Direct-To, or CrsTo functions.For an alternate nearby airport, use the NRST function and fly Direct-To a new DEST (destina-tion).E. Add Arrival Procedures (STARS)1. Press the Arrival key in the Destination section.2. Use the Large and Small knobs to select the runway, arrival, and transition.3. Press Menu/Enter.F. Add Approach Procedures1. Press the Appr key. Select the approach with the Large and Small knobs, or the keys on the right sideof the display. Press Menu/Enter.2. Press the XPND (Expand) key to view all waypoints and legs in the flight plan. Every waypoint, airway,procedure, and intersection is shown with the bearing and distance of each leg. Verify the waypoints inyour flight plan and resolve any discontinuities.3. Press EXEC.Flight PlanningFlying Direct to a Waypoint in aFlight Plan1. Press Direct-To. The flight plan waypointlist will be displayed.2. Turn the Large knob to highlight thedesired waypoint.3. Press the Direct key on the right side ofthe display.Making a Flight Plan Leg ActiveWith the FlyLeg Menu selection, you canactivate a particular leg of your flight plan.This feature allows you to bypass a waypointin your flight plan.1. Press Direct-To.2. Select the desired leg of your flight planwith the Large knob (ActFP smart key ishighlighted).3. Press the FlyLeg key to activate theselected leg.
