63Basic OperationTake offA. Set Origin, Destination, and Alternate Waypoints.B. Add Standard Instrument Departure Procedure (SID), if required.C. Insert en route flight plan of Airways and/or Waypoints.En RouteD. Modifying a Flight Plan While in FlightApproach and LandingE. Add Arrival Procedures (STAR).F. Add Approach Procedures when you receive clearance.A. Set Origin, Destination, and Alternate Waypoints1. In Flight Plan mode, press the NEW key.2. Use the Large and Small knobs to select the Origin waypoint. Press Menu/Enter.3. The Destination waypoint selection page will now be displayed. Select the Destination waypoint andpress Menu/Enter.4. Set an Alternate airport, if desired. Turn the Large knob CCW to highlight the flight plan name. Pressthe Altrnt key and select an alternate airport/waypoint along the flight plan with the Large and Smallknobs. The alternate airport will be added in parentheses to the flight plan name.5. Press SAVE.B. Add a Standard Instrument Departure (SID) ProcedureSIDs may be modified in either the Flight Plan (FPL) or Procedure (PROC) modes. The Procedure modemethod is shown.1. In Flight Plan mode, highlight the flight plan name and press EXEC.2. Press FN and then PROC.3. In the Origin section press the Depart key.NOTE: Guidance is not provided for Pilot Nav legs or Vectored SIDs. (Not in the database)Flight Planning
