September 2016 Maintenance ManualProgrammed Maintenance ProceduresPart No. 1272858 Genie Telehandlers 43P0- 2 D eutz Engine M aintenanc e – U nder 1000 H oursP0-2Deutz Engine Maintenance – Under 1000 HoursAdditional engine maintenance is required. Refer to theProgrammed Maintenance Inspection Report forthe specific intervals that apply.Required maintenance procedures and additional engine information are available in the manufacturer'smanuals. Refer to Specifications,Engine Operator and Maintenance Manuals.This maintenance schedule applies to the following Deutz Engines:Deutz TD 2.9 L4 Deutz TCD 3.6 L4 Deutz TCD 4.1 L4Deutz Engines Hour IntervalsProcedure ∅ = Not required Daily 250 500Oil level - check ∅ ∅Coolant level - check ∅ ∅Oil, fuel and coolant systems - check for leaks ∅ ∅Fuel system filter/water separator – inspect/drain ∅ ∅Air filter discharge valve - clean ∅ ∅Engine tightness – check for leaks ∅ ∅Exhaust system - inspect ∅ ∅Fuel pre-cleaner / fuel pre-filter - clean ∅ ∅Cooling system- check ∅ ∅Engine oil and filter – replace ∅ ∅Air filter - replace ∅ ∅Valve clearance - check/adjust ∅ ∅Engine coolant - test/add ∅ ∅Air intake pipes - inspect ∅ ∅V-belts - inspect ∅ ∅Fuel filter / separator - replace ∅ ∅
