Maintenance Manual September 2016Programmed Maintenance Procedures44 Genie Telehandlers Part No. 1272858P0- 3 Perki ns Engine M aintenanc e – U nder 1000 H oursP0-3Perkins Engine Maintenance – Under 1000 HoursAdditional engine maintenance is required. Refer to theProgrammed Maintenance Inspection Report forthe specific intervals that apply.Required maintenance procedures and additional engine information are available in the manufacturer'smanuals. Refer to Specifications,Engine Operator and Maintenance Manuals.This maintenance schedule applies to the following Perkins Engines:Perkins 854E-E34TA Perkins 1104D-E44TA Perkins 1204E-E44TAPerkins Engine Hour IntervalsProcedure ∅ = Not required Daily 50 500Oil level - check ∅ ∅Coolant level – check/add ∅ ∅Oil, fuel and coolant systems - check for leaks ∅ ∅Air filter discharge valve - clean ∅ ∅Fuel system filter/water separator – drain ∅ ∅Alternator belt - inspect/adjust/replace ∅ ∅V-belts - inspect/adjust/replace ∅ ∅Exhaust system - check for leaks ∅ ∅Fuel tank water/sediment - drain ∅ ∅Hoses and clamps – inspect/replace ∅ ∅Engine valve lash – inspect/adjust - 1104D-E44TA Models (initial one time service) ∅ ∅Battery electrolyte level - check ∅ ∅Cooling system supplement additive - test/add ∅ ∅Engine oil and filter – replace ∅ ∅Fuel system filter(s) - replace ∅ ∅Radiator – clean ∅ ∅Air cleaner element - clean/replace ∅ ∅Fan clearance - check ∅ ∅
