Genie INTELLIG 1000 3024H Operation And Maintenance Manual

Also see for INTELLIG 1000 3024: Manual

Genie INTELLIG 1000 3024H Operation And Maintenance Manual Manual pdf 16 page image

©2010 The Genie Company 12/2010163. Press the same button twiceto toggle IntelliCode®selection from IntelliCode® 2to IntelliCode® 1.INTELLICODE® FEATURESOther models of Genie® garage door openers,remotes, and wireless keypads useIntelliCode® 1 signals to communicate. Remote(s)provided with this unit will transmit eitherIntelliCode® 1 or IntelliCode® 2 signals.Remote(s) contained in this package are presetto IntelliCode® 2 and can be configured tocommunicate with previously installedIntelliCode® 1 openers. This dual IntelliCode®option allows one IntelliCode® 2 remote to operatedifferent models of The Genie Company garagedoor openers.This new Genie® garage door opener will ONLYaccept signals from a remote sending IntelliCode®2 signals (see page 9) or a Genie® brandIntelliCode® 1 remote that has been programmedto the opener using a new IntelliCode® 2 remote(see page 10).NOTE: Other remotes not enabled with Genie®IntelliCode® 2 will not operate this opener.If you have ... Use thisIntelliCode®programmingOne or more IntelliCode® 2openers with a maximum 3different openersUse IntelliCode®2Mixture of openersmanufactured between 1997and 2010 (IntelliCode® 1) andnew IntelliCode® 2 openersUse IntelliCode®2 and/or 1One or more openersmanufactured between 1997and 2010 (IntelliCode® 1)Use IntelliCode®1NOTE: A maximum of 3 different openers can beprogrammed to a 3 button remote.Programming remote to previously installedIntelliCode® 1 Genie® garage door openersRemotes provided with this unit can operate other(IntelliCode® 1) models of Genie® garage dooropeners. The default IntelliCode® 2 setting mustbe changed to IntelliCode® 1. (Follow these samesteps to change IntelliCode® 1 back to IntelliCode®2.)The LED color displayed on the remote indicatesthe IntelliCode® mode.Red = IntelliCode® 1 / Green = IntelliCode® 21. Select a button on the remote that has NOT beenprogrammed to thenew powerhead.2. Press and hold thatbutton for 10 seconds.Both Red and GreenLEDs come ON and stayON.10 SECS4. Press the same button againto confirm toggle. TheIntelliCode® selection for thisbutton is set to IntelliCode® 1.5. Take the remote to the older Genie® garage dooropener and follow that opener's instructions toprogram a new remote.Repeat for other Genie® garage remote(s) asnecessary.Red LED Green LEDThree buttonremoteATTENTIONIf you have another garage door opener that does NOT havea Serial Number like this, then you will be using theINTELLICODE® 1 setting on your remote to operate that opener.If your garage door opener has a Serial Number sticker whichlooks like this, in which the first two numbers are 10 or higher,your opener is equipped with INTELLICODE®2.MODEL AC SR3 THE GENIE COMPANYFCC ID: B8Q AC SR3 Residential Door OperatorIC: 2133A-CSD1D 120V. 60HZ. 5AFOR HELP CALL 1-800-35GENIE OR WWW.GENIECOMPANY.COMS/N:10XXXXXXXXXXXX