Genie INTELLIG 1000 3024H Operation And Maintenance Manual

Also see for INTELLIG 1000 3024: Manual

Genie INTELLIG 1000 3024H Operation And Maintenance Manual Manual pdf 9 page image

©2010 The Genie Company 12/2010 9PROGRAMSET—+PROGRAMSET—+PROGRAM INTELLICODE® 2 REMOTE TO POWERHEAD FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM2PRESS and HOLDSEE BOTHBlue LEDscome ONSEE round BlueLED come ON SEE long PurpleLED flashingRELEASE1 2 3 45 6 7The next press of the remote will operate door.Repeat as necessary for other remotes.Bring remote(s) to powerhead location.Begin with Step 1 and continue through Step 7 for each button to be programmed.NOTE: The following instructions are for the remote(s) provided with this opener. Thisremote is preset for use with the IntelliCode® 2 Access Security System. Refer to page16 for additional information on IntelliCode® 1 and 2 remotes and how to switch fromIntelliCode® 2 to IntelliCode® 1. See page 10 for programming instructions usingIntelliCode® 1 remotes.PRESS andRELEASEPRESS andRELEASEPRESS andRELEASEBasic powerhead programming is complete.Your garage door opener is ready to use.WARNINGA moving door can cause serious injury or death.1. Keep people clear of opening while door is moving.2. Do NOT allow children to play with opener, includingwall console, remote, or wireless keypad.3. During programming, door opener could begin to run,so stay away from moving door and its parts.SEE both LEDs OFFSEE both LEDsflash BluePRESS andRELEASESEE both LEDsflash Purple