Genie Monochrome Series-GigE Vision Camera Installing the Genie Camera • 19Sapera LT Library InstallationNote: to install Sapera LT and the Genie device driver, logon to the workstation as an administrator or with anaccount that has administrator privileges.When Sapera application development is performed on the same computer that the Genie is connected to, the SaperaDevelopment Library (version 6.0 or later) must be installed. Else, Sapera LT is not required to control the Geniecamera.• Insert the DALSA Sapera CD-ROM. If AUTORUN is enabled on your computer, the DALSA installationmenu is presented.• If AUTORUN is not enabled, use Windows Explorer and browse to the root directory of the CD-ROM.Execute launch.exe to start the DALSA installation menu and install the required Sapera components.• The installation program will prompt you to reboot the computer.• Continue with the Genie CD Package Installation described next.Refer to Sapera LT User’s Manual concerning application development with Sapera.
