April 2016 Service ManualScheduled Maintenance ProceduresPart No. 139378 Z-30/20N • Z-30/20N RJ • Z-34/22 • Z-34/22N 13Section 3 Schedul ed Mai ntenance Pr oceduresObserve and Obey: Maintenance inspections shall be completedby a person trained and qualified on themaintenance of this machine. Scheduled maintenance inspections shall becompleted daily, quarterly, semi-annually,annually and every 2 years as specified of theMaintenance inspection Report. The frequencyand extent of periodic examinations and testsmay also depend on national regulations.Failure to perform eachprocedure as presented andscheduled may cause death,serious injury or substantialdamage. Immediately tag and remove from service adamaged or malfunctioning machine. Repair any machine damage or malfunctionbefore operating the machine. Use only Genie approved replacement parts. Machines that have been out of service for aperiod longer than 3 months must complete thequarterly inspection.Machine Configuration: Unless otherwise specified, perform eachprocedure with the machine in the followingconfiguration:• Machine parked on a firm, level surface• Key switch in the off position with the keyremoved• The red Emergency Stop button in the offposition at both the ground and platformcontrols• Wheels chocked• All external AC power supply disconnectedfrom the machine• Boom in the stowed position• Turntable secured with the turntable rotationlock
