Command Manual – MulticastH3C S3600 Series Ethernet Switches-Release 1510 Chapter 5 IGMP Configuration Commands5-2Field DescriptionUptime Time elapsed since multicast group was discovered(hh: mm: ss).Expires Specifies when the member will be removed fromthe multicast group (hh: mm: ss).5.1.2 display igmp interfaceSyntaxdisplay igmp interface [ interface-type interface-number ]ViewAny viewParameterinterface-type interface-number: VLAN interface type and VLAN interface number ofthe router, used to specify a VLAN interface. If this argument is not specified, theinformation about all the VLAN interfaces running IGMP is displayed.DescriptionUse the display igmp interface command to display the IGMP configuration andrunning information on a VLAN interface.Example# Display the IGMP configuration and running information of all VLAN interfaces. display igmp interfaceVlan-interface1 (10.153.17.99):IGMP is enabledCurrent IGMP version is 2Value of query interval for IGMP(in seconds): 60Value of other querier time out for IGMP(in seconds): 120Value of maximum query response time for IGMP(in seconds): 10Value of robust count for IGMP: 2Value of startup query interval for IGMP(in seconds): 15Value of last member query interval for IGMP(in seconds): 1Value of query timeout for IGMP version 1(in seconds): 400Policy to accept IGMP reports: noneQuerier for IGMP: 10.153.17.99 (this router)IGMP group limit is 256No IGMP group reported
