H3C S3600 Series Command Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

Contents

H3C S3600 Series Command Manual Manual pdf 65 page image

Command Manual – MulticastH3C S3600 Series Ethernet Switches-Release 1510 Chapter 6 PIM Configuration Commands6-15ViewVLAN interface viewParameterNoneDescriptionUse the pim sm command to enable the PIM-SM protocol.Use the undo pim sm command to disable the PIM-SM protocol.By default, the PIM-SM protocol is disabled on the switch.You must enable the PIM-SM protocol on each VLAN interface respectively. Generally,the PIM-SM protocol is enabled on each VLAN interface.Related command: multicast routing-enable.Example# Enable the PIM-SM protocol on VLAN-interface10.system-viewSystem View: return to User View with Ctrl+Z.[H3C] multicast routing-enable[H3C] interface Vlan-interface 10[H3C-Vlan-interface10] pim sm6.1.16 pim timer helloSyntaxpim timer hello secondsundo pim timer helloViewVLAN interface viewParameterseconds: Interval (in seconds) at which a VLAN interface sends Hello packets, in therange of 1 to 18,000.DescriptionUse the pim timer hello command to set the interval at which a VLAN interface sendsHello packets.Use the undo pim timer hello command to restore the default value of the interval.By default, a VLAN interface sends Hello packets at the interval of 30 seconds.