Command Manual – MulticastH3C S3600 Series Ethernet Switches-Release 1510 Chapter 6 PIM Configuration Commands6-9The displayed information about the PIM multicast routing table includes the SPTinformation and RPF information.Example# Display the information about the PIM multicast routing table. display pim routing-tablePIM-SM Routing TableTotal 1 (S,G) entry, 1 (*,G) entry, 0 (*,*,RP) entry(*, 228.0.0.0), RP 23.12.0.1Protocol 0x20: PIMSM, Flag 0x3: RPT WCUptime: 00:00:13, Timeout in 197 secUpstream interface: Vlan-interface1, RPF neighbor: 200.1.0.1Downstream interface list:Vlan-interface401, Protocol 0x100: RPT, timeout in 197 sec(196.0.0.3, 228.0.0.0)Protocol 0x20: PIMSM, Flag 0x4: SPTUptime: 00:10:49, Timeout in 196 secUpstream interface: Vlan-interface196, RPF neighbor: NULLDownstream interface list:Vlan-interface401, Protocol 0x100: RPT, timeout in 197 secMatched 1 (S,G) entry, 1 (*,G) entry, 0 (*,*,RP) entryTable 6-4 Description on the fields of the display pim routing-table commandField DescriptionRP Rendezvous Point(S,G) (source address, multicast group)PIM-SM PIM Sparse ModeSPT Shortest Path TreeRPF Reverse Path ForwardingRPT Rendezvous Point Tree6.1.9 display pim rp-infoSyntaxdisplay pim rp-info [ group-address ]
