Command Manual – MulticastH3C S3600 Series Ethernet Switches-Release 1510Chapter 1 IGMP Snooping ConfigurationCommands1-2Enable IGMP-Snooping.The router port timeout is 105 second(s).The max response timeout is 10 second(s).The host port timeout is 260 second(s).The above-mentioned information shows: IGMP Snooping is enabled, the aging time ofthe router port is 105 seconds, the query response timeout time is 10 seconds, and theaging time of multicast member ports is 260 seconds.1.1.2 display igmp-snooping groupSyntaxdisplay igmp-snooping group [ vlan vlan-id ]ViewAny viewParametervlan-id: VLAN under which the multicast group information is to be displayed. If you donot provide this argument, this command displays the multicast group information of allVLANs.DescriptionUse the display igmp-snooping group command to display information about the IPand MAC multicast groups under the specified VLAN (with vlan vlan-id) or all VLANs(without vlan vlan-id).This command displays the following information: VLAN ID, router port, IP multicastgroup address, member ports included in the IP multicast group, MAC multicast group,MAC multicast group address, and member ports included in the MAC multicast group.Example# Display the information about the multicast groups under all the VLANs. display igmp-snooping groupTotal 1 IP Group(s).Total 1 MAC Group(s).Vlan(id):99.Total 1 IP Group(s).Total 1 MAC Group(s).Static Router port(s):Ethernet1/0/11Dynamic Router port(s):Ethernet1/0/22
