1-4display arpSyntaxdisplay arp [ [ all | dynamic | static ] | vlan vlan-id | interface interface-type interface-number ] [ [ |{ begin | exclude | include } regular-expression ] | count ]ViewAny viewDefault Level1: Monitor levelParametersall: Displays all ARP entries.dynamic: Displays dynamic ARP entries.static: Displays static ARP entries.vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from 1 to 4,094.interface interface-type interface-number: Displays the ARP entries of the interface specified by theargument interface-type interface-number.|: Uses a regular expression to specify the ARP entries to be displayed. For detailed information aboutregular expressions, refer to Basic System Configuration.begin: Displays ARP entries from the first one containing the specified string.exclude: Displays the ARP entries that do not contain the specified string.include: Displays the ARP entries containing the specified string.regular-expression: A case-sensitive string for matching, consisting of 1 to 256 characters.count: Displays the number of ARP entries.DescriptionUse the display arp command to display ARP entries in the ARP mapping table.If no parameter is specified, all ARP entries are displayed.Related commands: arp static, reset arp.Examples# Display the detailed information of all ARP entries. display arp allType: S-Static D-DynamicIP Address MAC Address VLAN ID Interface Aging Type192.168.0.57 00e0-fc00-000b 1 GE1/0/23 10 D192.168.0.56 000f-cb00-5601 1 GE1/0/23 10 DTable 1-1 display arp command output descriptionField DescriptionIP Address IP address in an ARP entry
