1-8[Sysname-GigabitEtherhet1/0/1] packet-filter 2001 inbound# Apply Ethernet frame header ACL 4001 to the inbound direction of interface GigabitEthernet 1/0/1. system-view[Sysname] interface gigabitethernet 1/0/1[Sysname-GigabitEtherhet1/0/1] packet-filter 4001 inboundreset acl counterSyntaxreset acl counter { acl-number | all | name acl-name }ViewUser viewDefault Level2: System levelParametersacl-number: Specifies an ACL by its number:z 2000 to 2999 for basic ACLsz 3000 to 3999 for advanced ACLsz 4000 to 4999 for Ethernet frame header ACLsall: Clears statistics for all ACLs.name acl-name: Specifies an ACL by its name. The acl-name argument takes a case insensitive stringof 1 to 32 characters. It must start with an English letter.DescriptionUse the reset acl counter command to clear statistics for the specified or all ACLs.Related commands: display acl.Examples# Clear statistics on ACL 2001. reset acl counter 2001# Clear statistics on ACL flow. reset acl counter name flowrule (advanced ACL view)Syntaxrule [ rule-id ] { deny | permit } protocol [ { established | { ack ack-value | fin fin-value | psh psh-value| rst rst-value | syn syn-value | urg urg-value } * } | destination { dest-addr dest-wildcard | any } |destination-port operator port1 [ port2 ] | dscp dscp | fragment | icmp-type { icmp-type icmp-code |icmp-message } | logging | precedence precedence | reflective | source { sour-addr sour-wildcard |any } | source-port operator port1 [ port2 ] | time-range time-range-name | tos tos ] *
