1-5[Sysname-pki-domain-1] certificate request mode autocertificate request pollingSyntaxcertificate request polling { count count | interval minutes }undo certificate request polling { count | interval }ViewPKI domain viewDefault Level2: System levelParameterscount count: Specifies the maximum number of attempts to poll the status of the certificate request, inthe range 1 to 100.interval minutes: Specifies the polling interval in minutes, in the range 5 to 168.DescriptionUse the certificate request polling command to specify the certificate request polling interval andattempt limit.Use the undo certificate request polling command to restore the defaults.By default, the polling is executed every 20 minutes for up to 50 times.After an applicant makes a certificate request, the CA may need a long period of time if it verifies thecertificate request manually. During this period, the applicant needs to query the status of the requestperiodically to get the certificate as soon as possible after the certificate is signed.Related commands: display pki certificate.Examples# Specify the polling interval as 15 minutes and the maximum number of attempts as 40. system-view[Sysname] pki domain 1[Sysname-pki-domain-1] certificate request polling interval 15[Sysname-pki-domain-1] certificate request polling count 40certificate request urlSyntaxcertificate request url url-stringundo certificate request urlViewPKI domain view
