1-5Table 1-2 display ssl server-policy command output descriptionField DescriptionSSL Server Policy SSL server policy namePKI Domain PKI domain used by the SSL server policyCiphersuite Cipher suites supported by the SSL server policyHandshake Timeout Handshake timeout time of the SSL server policy, in secondsClose-modeClose mode of the SSL server policy, which can be:z wait disabled: In this mode, the server sends a close-notify alertmessage to the client and then closes the connection immediatelywithout waiting for the close-notify alert message of the client.z wait enabled: In this mode, the server sends a close-notify alertmessage to the client and then waits for the close-notify alert messageof the client. Only after receiving the expected message, does theserver close the connection.Session Timeout Session timeout time of the SSL server policy, in secondsSession Cachesize Maximum number of buffered sessions of the SSL server policyClient-verify Whether client authentication is enabled for the SSL server policyhandshake timeoutSyntaxhandshake timeout timeundo handshake timeoutViewSSL server policy viewDefault Level2: System levelParameterstime: Handshake timeout time in seconds, in the range 180 to 7200.DescriptionUse the handshake timeout command to set the handshake timeout time for an SSL server policy.Use the undo handshake timeout command to restore the default.By default, the handshake timeout time is 3600 seconds.If the SSL server does not receive any packet from the SSL client before the handshake timeout timeexpires, the SSL server will terminate the handshake process.Related commands: display ssl server-policy.Examples# Set the handshake timeout time of SSL server policy policy1 to 3000 seconds. system-view
