1-6Field Descriptionhops max Maximum number of hops of the probe packets, which can beset through the -m keywordbytes packet Number of bytes of a probe packetpress CTRL_C to break During the execution of the command, you can press Ctrl+C toabort the tracert operation.1 1.1.1.2 673 ms 425 ms 30 msThe probe result of the probe packets whose TTL is 1, includingthe IP address of the first hop and the roundtrip time of threeprobe packets.The number of packets that can be sent in each probe can beset through the -q keyword.System Debugging CommandsdebuggingSyntaxdebugging { all [ timeout time ] | module-name [ option ] }undo debugging { all | module-name [ option ] }ViewUser viewDefault Level1: Monitor levelParametersall: All debugging functions.timeout time: Specifies the timeout time for the debugging all command. When all debugging isenabled, the system automatically executes the undo debugging all command after the time. Thevalue ranges from 1 to 1440, in minutes.module-name: Module name, such as arp or device. You can use the debugging ? command to displaythe current module name.option: The debugging option for a specific module. Different modules have different debugging optionsin terms of their number and content. You can use the debugging module-name ? command to displaythe currently supported options.DescriptionUse the debugging command to enable the debugging of a specific module.Use the undo debugging command to disable the debugging of a specific module.By default, debugging functions of all modules are disabled.Note the following:
