1-6ViewInterface viewDefault Level2: System levelParametersremote-id: Padding content for the user-defined remote ID sub-option, a case sensitive string of 1 to 63characters.sysname: Specifies the device name as the padding content for the remote ID sub-option.DescriptionUse the dhcp relay information remote-id string command to configure the padding content for theuser-defined remote ID sub-option.Use the undo dhcp relay information remote-id string command to restore the default.By default, the padding content for the remote ID sub-option depends on the padding format of Option82.Note that: After you configure the padding content for the remote ID sub-option using this command,ASCII is adopted as the code type.If you want to specify the character string sysname (a case-insensitive character string) as the paddingcontent for the remote ID sub-option, you need to use quotation marks to make it take effect. Forexample, if you want to specify Sysname as the padding content for the remote ID sub-option, youneed to enter the dhcp relay information remote-id string “Sysname” command.Related commands: dhcp relay information format, display dhcp relay information.Examples# Configure the padding content for the remote ID sub-option as device001. system-view[Sysname] interface vlan-interface 1[Sysname-Vlan-interface1] dhcp relay information remote-id string device001dhcp relay information strategySyntaxdhcp relay information strategy { drop | keep | replace }undo dhcp relay information strategyViewInterface view
