1-11ViewAny viewDefault Level1: Monitor levelParametersinterface-type interface-number: Specifies an interface by its type and number.DescriptionUse the display poe-profile interface command to display all information of the configurations andapplications of the PoE configuration file that currently takes effect on the specified PoE interface.Examples# Display all information of the configurations and applications of the current PoE configuration fileapplied to GigabitEthernet1/0/1. display poe-profile interface gigabitethernet 1/0/1Poe-profile Index ApplyNum Interface Current ConfigurationforIPphone 1 6 GE1/0/1 poe enablepoe priority criticalBecause not all the configurations of a PoE configuration file can be applied successfully, only theconfigurations that currently take effect on the interface are displayed. For the descriptions for otherfields, refer to Table 1-6.poe disconnectSyntaxpoe disconnect { ac | dc }undo poe disconnectViewSystem viewDefault Level2: System levelParametersac: Specifies the PD disconnection detection mode as ac.dc: Specifies the PD disconnection detection mode as dc.DescriptionUse the poe disconnect command to configure a PD disconnection detection mode.Use the undo poe disconnect command to restore the default.The default PD disconnection detection mode is ac.Note that change to the PD disconnection detection mode may lead to power-off of some PDs.
