114Path Name : ErHop-Path1 Path Status : Enabled1 1.1.1.10 Strict Include2 2.1.1.10 Strict Include3 1.1.1.20 Strict Include4 2.1.1.20 Strict Include5 2.1.1.30 Strict Include6 1.1.1.30 Strict Include7 9.4.4.4 Strict IncludePath Name : ErHop-Path2 Path Status : Enabled1 1.1.1.10 Strict Include2 2.1.1.10 Strict Include3 1.1.1.40 Strict Include4 2.1.1.40 Strict Include5 1.1.1.50 Strict Include6 2.1.1.40 Strict Include7 2.1.1.30 Strict Include8 1.1.1.30 Strict Include9 9.4.4.4 Strict IncludeTable 39 Command outputField DescriptionPath Name Explicit path name.Path Status Explicit path status.display isis traffic-eng advertisementsUse display isis traffic-eng advertisements to display the latest TE information advertised by IS-IS.Syntaxdisplay isis traffic-eng advertisements [ [ level-1 | level-1-2 | level-2 ] | [ lsp-id lsp-id | local ] ] *[ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParameterslevel-1: Displays the TE information for IS-IS Level-1 routers.level-1-2: Displays the TE information for IS-IS Level-1-2 routers.level-2: Displays the TE information for IS-IS Level-2 routers.lsp-id lsp-id: Displays the IS-IS TE information advertised by the specified link state packet (LSP). For moreinformation about IS-IS LSP, see Layer 3—IP Routing Configuration Guide.local: Displays local TE information.process-id: Specifies an IS-IS process ID in the range of 1 to 65535.
