122Session State : Up Source IP : 1.1.1.1Session Role : ActiveTotal Session Num: 1Table 44 Command outputField DescriptionType Type of the tunnel detected by BFD, LSP or TE Tunnel.Local Discr Local discriminator of the BFD session.Remote Discr Remote discriminator of the BFD session.Session State Status of the BFD session, Init (initializing), Up, or Down.Source IP IP address of the active end (ingress LSR) of the BFD session.Session Role Role of the LSR in the BFD session, Active or Passive.display mpls rsvp-teUse display mpls rsvp-te to display RSVP-TE configuration.Syntaxdisplay mpls rsvp-te [ interface [ interface-type interface-number ] [ | { begin | exclude | include }regular-expression ] ]ViewsAny viewDefault command level1: Monitor levelParametersinterface: Displays RSVP-TE configuration for interfaces.interface-type interface-number: Specifies an interface for which RSVP-TE configuration is displayed.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Usage guidelinesIf the interface keyword is not specified, this command displays the global RSVP-TE configuration.If no interface is specified through the interface-type interface-number argument, this command displaysthe RSVP-TE configuration of all RSVP-TE enabled interfaces.Examples# Display the global RSVP-TE configuration.
