1414 3.3.3.3 ISIS 100 Level-1 1Network LSA Information for Area 1:Id DR MPLS LSR-Id DR-Address IGP Process-Id Area Neighbor1 3.3.3.3 20.1.1.2 OSPF 100 1 2.2.2.23.3.3.32 3.3.3.3 20.1.1.2 ISIS 100 Level-1 3.3.3.32.2.2.2Table 59 Command outputField DescriptionId Sequence number.MPLS LSR-Id MPLS LSR ID, in dotted decimal notation.IGP Interior gateway protocol: OSPF or IS-IS.Process-Id IGP process ID.Area Area to which the router belongs.Link-Count Total number of connected links belonging to aparticular IGP protocol process.DR MPLS LSR-Id MPLS LSR ID of the DR.DR-Address Interface address of the DR.Neighbor MPLS LSR ID of the neighbor.display mpls te link-administration admission-controlUse display mpls te link-administration admission-control to display information about CR-LSPs carriedon the link of a specific interface or links of all interfaces if no interface is specified.Syntaxdisplay mpls te link-administration admission-control [ interface interface-type interface-number ] [ |{ begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersinterface interface-type interface-number: Specifies an interface by its type and a number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.
