125Interface Vlan-interface 3Token Bucket Rate: 0.00 Peak Data Rate: 0.00Tunnel Dest: 2.2.2.2 Ingress LSR ID: 3.3.3.3Local LSP ID: 4 Session Tunnel ID: 4Next Hop Addr: 80.4.1.1Upstream Label: 1024 Downstream Label: 3Table 47 Command outputField DescriptionInterface RSVP-TE enabled interface.Token Bucket rate Token bucket rate, a traffic parameter.Peak Data Rate Peak rate, a traffic parameter.Tunnel Dest Tunnel destination, in the format of X.X.X.X.Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X.Next Hop Addr Next hop address, in the format of X.X.X.X.display mpls rsvp-te peerUse display mpls rsvp-te peer to display information about RSVP-TE neighbors on the specified or allinterfaces.Syntaxdisplay mpls rsvp-te peer [ interface interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersinterface interface-type interface-number: Specifies an interface by its type and number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Examples# Display information about RSVP-TE neighbors on all interfaces. display mpls rsvp-te peerInterface Vlan-interface 1Neighbor Addr: 80.4.1.1SrcInstance: 841 NbrSrcInstance: 928
