137display mpls static-cr-lspUse display mpls static-cr-lsp to display information about static CR-LSPs.Syntaxdisplay mpls static-cr-lsp [ lsp-name lsp-name ] [ egress | ingress | transit ] [ { include | exclude }ip-address prefix-length ] [ verbose ] [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParameterslsp-name lsp-name: Specifies the name of an LSP. The LSP name is a string of 1 to 15 characters.egress: Displays static CR-LSPs taking the current device as the egress node.ingress: Displays static CR-LSPs taking the current device as the ingress node.transit: Displays static CR-LSPs taking the current device as a transit node.include: Displays only CR-LSPs with the destination IP address specified by the ip-address prefix-lengtharguments.exclude: Displays only CR-LSPs with destination IP addresses other than the one specified by theip-address prefix-length arguments.ip-address: IP address of the FEC.prefix-length: IP address prefix length, in the range of 0 to 32.verbose: Displays detailed information.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Examples# Display brief information about all static CR-LSPs. display mpls static-cr-lsptotal statics-cr-lsp : 1Name FEC I/O Label I/O If StateTunnel0 3.3.3.9/32 NULL/100 -/Vlan1 DownTable 55 Command outputField DescriptionName Static CR-LSP name.FEC FEC destination address and mask.
