68Table 28 Command outputField DescriptionVrfName MPLS L3VPN name.This field is blank for a public network or N/A (ASBR) for an ASBR LSP.FecForwarding equivalence class in either of these two forms:• IP address/mask—Classifies packets to FECs based on destinationaddresses.• IP address—Classifies packets to FECs based on the addresses of the nexthops.Tunnel ID Tunnel ID (the public network).LsrType Role of the LSR for the LSP: Ingress, Transit, or Egress.Outgoing Tunnel ID Tunnel ID (inter-AS VPN).Label Operation Label operation performed: POP, PUSH, or SWAP.Related commands• display mpls lsp• display mpls static-lsp• display mpls statistics lspdisplay mpls lsp bfd ipv4Use display mpls lsp bfd ipv4 to display BFD information for LSPs.Syntaxdisplay mpls lsp bfd [ ipv4 destination-address mask-length ] [ | { begin | exclude | include }regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersdestination-address mask-length: Displays BFD information for the LSPs for a FEC. Thedestination-address argument is the FEC destination IP address. The mask-length argument is the masklength of the destination address, in the range of 0 to 32.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
