49Create Time : 07:57:26:927Last Change Time : 07:57:26:927Tunnel ID : 0xc0002(Done)GrCount: 0Service : Statistics(Succeeded)Table 16 Command outputField DescriptionIn Label Incoming label.LSP Type LSP type: LDP LSP, CR-LDP, RSVP LSP, BGP LSP, L3VPN LSP, STATICLSP, STATIC CR-LSP, L2VPN LSP, or BGP IPv6 LSP.In Interface Incoming interface.Operation Operation type: POP, POPGO, SWAPGO, or NULL.Swap Label Label for swapping.Out Interface Outgoing interface.Service Instance ID L2VPN service instance ID.StatusTunnel status:• MAIN—Main tunnel.• BACKUP—Backup tunnel. The BACKUP status is displayed onlywhen the tunnel is the backup tunnel in a 1+1 tunnel protectiongroup.Create Time Time when the entry was created.Last Change Time Time of the last update of the entry.Tunnel ID Public tunnel ID and entry status (Done or Waiting).GrCount—Number of times that GR occurs.ServiceService type and status. The service type is Statistics and the servicestatus can be Succeeded (service has been enabled successfully) orFailed (service failed to be enabled).display mpls interfaceUse display mpls interface to display MPLS information about one or all interfaces with MPLS enabled.Syntaxdisplay mpls interface [ interface-type interface-number ] [ verbose ] [ | { begin | exclude | include }regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersinterface-type interface-number: Specifies an interface by its type and number. If you do not specify aninterface, the command displays MPLS information about all MPLS-enabled interfaces.
