29IPv6 MCE configuration commandsThis chapter describes only the commands related to the IPv6 MCE feature. For information about therouting protocol configuration commands in the configuration examples, see Layer 3—IP RoutingCommand Reference.display bgp vpnv6 vpn-instance peerUse display bgp vpnv6 vpn-instance peer to display information about the IPv6 BGP peers in thespecified VPN instance.Syntaxdisplay bgp vpnv6 vpn-instance vpn-instance-name peer [ ipv6-address verbose | verbose ] [ | { begin| exclude | include } regular-expression ]ViewsAny viewDefault command level1: MonitorParametersvpn-instance-name: Specifies the name of a VPN instance, a case-sensitive string of 1 to 31 characters.ipv6-address: Specifies the IPv6 address of a peer.verbose: Displays the detailed information.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Usage guidelinesIf you do not specify any optional parameters, the command displays brief information about all IPv6BGP peers.Examples# Display brief information about the IPv6 BGP peers in VPN instance vpn1. display bgp vpnv6 vpn-instance vpn1 peerBGP local router ID : 2.2.2.2Local AS number : 100Total number of peers : 1 Peers in established state : 1Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
