355To do… Use the command… RemarksStep 4 Enable strict LSA checking graceful-restart helper strict-lsa-checkingOptionalDisabled by defaultDisplaying and maintaining OSPFv3To do… Use the command… RemarksStep 1 Display OSPFv3debugging stateinformationdisplay debugging ospfv3Available inany viewStep 2 Display OSPFv3 processbrief information display ospfv3 [ process-id ]Step 3 Display OSPFv3interface informationdisplay ospfv3 interface [ interface-type interface-number | statistic ]Step 4 Display OSPFv3 LSDBinformationdisplay ospfv3 [ process-id ] lsdb [ [ external |inter-prefix | inter-router | intra-prefix | link| network | router | grace ] [ link-state-id ] [originate-router router-id ] | total ]Step 5 Display OSPFv3 LSDBstatistics display ospfv3 lsdb statisticStep 6 Display OSPFv3neighbor informationdisplay ospfv3 [ process-id ] [ area area-id ] peer[ [ interface-type interface-number ] [ verbose ] |peer-router-id ]Step 7 Display OSPFv3neighbor statistics display ospfv3 peer statisticStep 8 Display OSPFv3 routingtable informationdisplay ospfv3 [ process-id ] routing [ ipv6-address prefix-length | ipv6-address/prefix-length |abr-routes | asbr-routes | all | statistics ]Step 9 Display OSPFv3 areatopology informationdisplay ospfv3 [ process-id ] topology [ areaarea-id ]Step 10 Display OSPFv3 virtuallink information display ospfv3 [ process-id ] vlinkStep 11 Display OSPFv3 nexthop information display ospfv3 [ process-id ] next-hopStep 12 Display OSPFv3 linkstate request listinformationdisplay ospfv3 [ process-id ] request-list [ {external | inter-prefix | inter-router | intra-prefix | link | network | router | grace } [ link-state-id ] [ originate-router ip-address ] | statistics]
