Handy Tech actilino User Manual
Also see for actilino: Short Reference
                                                                                                                | |
Contents
| 
ActilinoInstallationPage 13Magnets are placed in the center of the backside of the carrying and inside the Actilino toprevents its sliding out from the carrying case.2.7 Installation of the Bluetooth Tie-InBecause your Actilino features a Bluetooth transmission module, you can also establish awireless connection between the Actilino and three different devices at the same time (e.g.computer, smart phone, tablet), if they are equipped with wireless Bluetooth technology. Youcan cycle between the USB port and the three Bluetooth ports by pressing [SPC + 4 5 8]. Ifthere is only one active connection, you cannot switch.Bluetooth is always switched on when switching on the Actilino. If no Bluetooth connectionis used within 15 minutes, Bluetooth automatically turns off. When you wake up the Actilinofrom standby, Bluetooth turns on again for 15 minutes.The wireless transmission radius is approximately 10 meters (10 yards or 33 feet).2.7.1 Bluetooth-PC Tie-In1. Please make sure that the Actilino is switched on and Bluetooth is enabled.2. Select "Bluetooth Devices" from the control panel or from your system tray andpress the context menu key.3. Select the “new device/connection” item4. "Add Bluetooth Device Wizard" will appear.5. All detected Bluetooth devices will be listed. Select the Actilino from the list andpress "Next". Actilino will display the same pairing code. Press “y” (dots1+3+4+5+6) on Actilino to confirm or “n” (dots 1+3+4+5) to reject the incomingpairing request.6. Normally the PC will create a pairing code which you accept by pressing “Next”.7. Now the pairing will be done and the needed drivers will be installed. Please wait amoment. Please confirm by pressing "Finish".Your Actilino now has a wireless connection to the PC and you can utilize all of its functions,as if it were connected via the USB cable.Note:If you move the Actilino beyond the Bluetooth connection's communication radius (10meters/yards), the connection to the PC will be interrupted. The connection will automaticallybe re-established by Handy Tech's Braille device driver once you move back within range.For this you need to have installed the latest Braille display driver (see chapter 2.2).2.7.2 Bluetooth Apple iOS Device Tie-InMobile Apple devices, such as the iPhone or iPad, include the screen reader VoiceOver bydefault, which enables blind people to operate the devices by speech and Braille output. Inorder to connect the Actilino via Bluetooth with an Apple device, you have to activateVoiceOver first. Please follow these steps:1. Please make sure that the Actilino is turned on and Bluetooth is enabled. After turningthe device on, there is a timeframe of 15 minutes to establish a Bluetooth connection.2. Open “Settings” on the home screen of your iOS device.3. Choose Accessibility from the “General“ page. |
Related manuals for Handy Tech actilino
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine