Handy Tech actilino User Manual
Also see for actilino: Short Reference
                                                                                                                | |
Contents
| 
ActilinoActive Tactile Control (ATC)Page 91If you check the "Generate protocol" checkbox at "Reading protocol", everything you enteror read on the Braille display will be logged in a protocol file as of the moment when youclick "OK" or "Apply". It is faster to use the short key combination [SPCL + 1 2 3] (chord l) toactivate the logging function. If ATC was off, it will be automatically activated. You are freeto choose any name for this protocol file. The default file name is “HtAtc.log”. Generatingthe reading protocol stops only when you deactivate this "Generate protocol" option againor when you quit the screen reader. The protocol file can be scanned and analyzed by anevaluation program later.9.1 ATC Assistant for Reading or LearningYou can specify how the screen reader is supposed to react to your reading behavior. Thefollowing actions are available:• no action• speak letter: The letter at the current reading position will be spoken.• speak word: When touching the first letter of a word, the word will be spoken. It isalso possible to change the setting so that the word is spoken when read completely.Here you can also set a delay time.• speak Braille display: The text shown on the Braille display will be spoken by thespeech output.• low tone signal• high tone signal• speak Braille display and move to the next line: When using this setting with "readingfast", you can skip through text line by line till you reach the section where you wantto read without speech. After refreshing the Braille display, the reading of the previousline will be interrupted and the reading starts with the new position.• say all and route Braille line: Starts reading the whole text and the Braille display willbe synchronized with the reading position of the speech output. When detecting anyreading position, the speech will stop and the Braille display shows the currentposition.• say current character´s attributes: The attribute at the current reading position will beannounced, e.g. "bold Arial 12".• say character attribute changes: If the attribute at the reading position changes, likefrom normal to bold, then "bold" will be announced. Also, changes of font type andfont size will be announced, e.g. "bold Arial 12".• route mouse cursor to reading position: The mouse pointer will – depending on thereading behavior – be moved with the reading position. This helps to synchronize themagnification area on the screen with the reading position on the Braille display.The following four behaviors can be detected as your reading status:• reading fast• reading normal• resting• reading backwardsIt is also possible to delay the speech output for a certain amount of time if you do not wantthe text to be spoken right away. This delay is entered in milliseconds. The possible rangefor this value is from 0 (no delay) to 5000 milliseconds. |
Related manuals for Handy Tech actilino
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine