ActilinoThe Actilino as Braille DisplayPage 80The cursor routing keys (CR) are used to directly place the cursor at that text position.7.2 Screen readers using Windows: Example JAWSThe functionality of JAWS for Windows is so extensive that only the basic functions foroperating the Braille display can be described in brief in this section.The status modules of a Braille display contain important data regarding screen positioning.Since your Actilino does not include status modules, you can use [SPCL+SPCR] to togglebetween displaying the contents of the screen and the status module display. The first threestatus elements indicate the cursor's pixel position within the line. The fourth status elementindicates which mode is currently active, as follows:• p for PC cursor• j for JAWS cursor• s for structured modeDots 7 and 8 of the status elements show the Braille display's position in a window line. Theyhave the following meanings:1+2+3+4: The entire window line is shown on the Braille display1+2: Left half of the window line3+4: Right half of the window line2+3: There is more text on the left and right in the window line7.2.1 OverviewThis table lists all functions associated with the Braille and control keys on the Actilino. Wehave not included an exhaustive description of each of the functions, because these arecontained in the JAWS for Windows manual.Control Key/Braille Dot Function[7] Activate PC cursor tracking.[3] Display the first line in the window (title).[2] Move the Braille display to the left.[1] Move the Braille display section one line up withoutchanging the horizontal position.[SPCL] If there is any text to the left of the Braille display section,it moves to the left, if not, it moves one line up and movesthe cursor.[SPCR] If there is any text to the right of the Braille display section,it moves to the right, if not, it moves one line down andmoves the cursor.[4] Move the Braille display section one line down withoutchanging the horizontal position.[5] Move the Braille display to the right.[6] Display the last line in the window.[8] Drag the JAWS cursor to the PC cursor and activate theJAWS cursor.[TU] If there is any text to the left of the Braille display section,it moves to the left, if not, it moves one line up.
