ActilinoStart UpPage 163 Start Up3.1 Version InformationAs of this Section, all common characteristics of the Actilino will be described. Thisinformation applies to firmware Version 1.6 of your Actilino.3.2 Turning the Power OnPress the on/off button to turn the Actilino on. You can now work independent of a powersource, because the battery is fully charged. You will hear a sound signal and the followingstart up message will be displayed on the Braille display:'actilinoxbHH:MM?'• The start message of the Actilino provides an overview of some informationconcerning the device and shows the time. It is constructed according to thisscheme: The model name of the device "actilino" (cells 1-8).• Charging indicator (cell 9): The battery charge status is displayed in the form of abar whose height corresponds to one of the five charging states. If no point is set,this corresponds to the "empty" charge state. When the battery charge level is full,all eight points are set. When loading, the charge indicator grows in steps frombelow to the current charge state. When charging, the charging indicator movesfaster. After switching on the device, it takes about 10 seconds for this informationto be available.• Bluetooth status (cell 10): This cell indicates whether Bluetooth is switched on and,if so, whether Bluetooth connections exist. If Bluetooth is off, this cell is empty. Asmall b indicates that Bluetooth is on. If a large B is shown, there is currently aBluetooth connection. If point 8 is set, two Bluetooth connections exist. If dot 6 is setadditionally, there will be three Bluetooth connections.• Time (cells 11-15): The clock of the Actilino is displayed in 24-hour format andwithout seconds. The colon between hours and minutes flashes every second.• Call up the support information (cell 16): After pressing the cursor routing key abovethe Braille cell 16, a compact information is displayed which can be important forsupport purposes. To return to the start message, press TLM or ESC and TRM orEnter.The abbreviations in the support information have the following meaning:• FW (“firmware“): version of the installed firmware• SN (“serial number“):the Actilino’s serial number• NSRV (“next service“): month and year of the next due maintenance• LSRV (“last service“): month and year of last maintenance• T (“tasks“): Performed during the last maintenanceo CPS (“caps“): caps exchanged
