Handy Tech actilino User Manual
Also see for actilino: Short Reference
                                                                                                                | |
Contents
| 
ActilinoOperation of the ActilinoPage 60The paste command can also be used for writing to input fields. For example, if you want touse a chapter title as the name of a bookmark, you can mark that title in the file as a block,copy it to the clipboard with [SPC+1 4] (Chord c), then move the cursor to the desiredposition for the mark, press [TU+TD] and respond to the dialog prompting you for the nameof the mark with [SPC+1 2 3 6] (Chord v).The contents of the clipboard remain intact as long as the Actilino is in operation, so thatyou may paste several times, including into other files. However, once the Actilino is turnedoff, the contents of the clipboard are deleted upon turning the device back on. The memoryavailable for the clipboard is limited by the remaining free memory in the file system.5.2.13.5 Exchange Mark and Cursor (SPC+7 8)You can use this command to return to your original position after executing the followingfunctions:• When you have jumped to the beginning or end of the file.• When you have marked a text block in order to copy or cut it. In this case, you willreturn to the beginning of the block, where you can use one of the block functions.• When you have pressed [TLC] while marking a block.• When you have pasted text from the clipboard into the file.The Exchange Mark and Cursor function will set a mark at your current position in the textand the cursor will be returned to the position it was in before one of the functions listedabove was executed. The section of text between this mark and the cursor will now bemarked as a block. You can easily cancel the underlines if desired by pressing the [TLC]key.If you enter the command again, the previously set mark and the cursor position will beexchanged again. You can therefore use this function to jump from the beginning to the endof your text block and back or to jump back and forth between your current and the previouscursor position.5.2.13.6 Deleting a Text Block (SPC+ 1 3 4 6 7 = Chord X, SPC+1 2 = Chord b)If you want to delete a large section of text which you do not want to paste anywhere else,you can enter the [SPC+1 3 4 6 7] (Chord X) command which cuts the block without writingit to the clipboard. Alternatively, you can also use the backspace command (SPC+1 2 =Chord b). Again, you will be notified in terms of a percentage value that the text is beingdeleted.5.2.13.7 Saving a Block to a File (SPC+2 3 4 = Chord s)When you have marked a block, you can save it in its own file by using [SPC+2 3 4] (Chords). The text block will not be deleted from the current file. Additional details regarding thesaving of files are contained in chapter 5.2.19.5.2.14 SearchesYou can look for a search string in a text file in two different ways: with an incremental searchor with a buffered search. Both searches can move either forwards or backwards. Anysearch begins at the cursor position. |
Related manuals for Handy Tech actilino
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine