5 - Operation105Dilution of Spray LiquidUse the dilution functions in the following way:Tank dilutionWhen the main tank is empty, and the spray liquid composition is goingto be changed, the residual fluid in the tank must be diluted beforedriving back to the farm for refilling.1. Turn Off the main On/Off.2. Flick the dilution switch to “tank dilution” (A).3. Fill approximately 1/3 of the rinsing tank content into the main tank.4. Flick the dilution switch back to “spraying” (B). Leave the switch herefor at least 30 seconds.5. Turn On the main On/Off and begin driving in the field to spray out the diluted spray liquid.6. While spraying the diluted liquid, turn the main On/Off to Off and then On again shortly. This also dilutes the boomequalization piping.7. Repeat step 1-6 two more times (until the rinsing tank is empty).Boom dilutionWhen spraying work is being interrupted or finished, the boom pipingmust be diluted before driving back to the farm.1. Continue driving in the field while leaving the main On/Off On.2. Flick the dilution switch to “boom dilution” (C).3. Empty out approximately 1/2 of the rinsing tank content into thefield through the boom.4. Turn off the PTO to stop the dilution of the boom piping.5. Flick the dilution switch back to “spraying” (B) to be ready for resuming spraying later.6. Turn main On/Off to Off and drive home.÷ Do not turn the main On/Off to Off while diluting the boom piping, as the remaining spray liquid in the main tankwill then be diluted.Before Returning to Refill the SprayerIf the sprayer is to be refilled at the farm, or at a fixed filling place without a filling space with hard surface and drain to aclosed reservoir, the sprayer should be rinsed before returning to refill.Dilute the residues of the spraying circuit, and spray it on the crop. Depending on the weather conditions, it could also benecessary to clean the sprayer on the outside now while in the field, before returning to the farm.± WARNING! Always follow local legislation in force at any time.Parking the SprayerTo avoid spot contamination, the sprayer should always be parked at either the washing/filling location or under roof.This prevents rainfall from washing down chemical residues from the sprayer's surfaces.• Parking at the washing/filling location will retain residues.• Always park the machine out of reach of children, animals and unauthorized persons.• Always follow local regulations when parking your sprayer.ABCABC
