6 - Maintenance12810 Hours Service - CycloneFilterServicing the Filter1. Turn the pressure valve towards the unused function or to “tankcleaning nozzles”.2. Unscrew the filter lid (A).3. Lift lid and filter (B) away from the housing.4. Turn the two locks (C) outwards to unlock the filter from the lid.5. Separate filter from the integrated filter guide in the lid. Clean thefilter.To reassemble1. Grease the two O-rings on the lid/filter guide. Due to small spaceat the lid, use a paintbrush to apply the grease.2. Mount the filter onto the recess (which may not be greased) in thelid/filter guide.3. Turn the two locks (C) inwards to lock the filter into position.4. Place the filter/filter lid into the housing and screw the lid, until ithits the stop.± WARNING! Always wear protective clothing and gloves, before servicing the filter!€ DANGER! The pressure valve must always be turned to the unused function or to “tank cleaning nozzles”, beforeopening the CycloneFilter! If not, the spraying liquid can hit you, when opening the filter, and the main tank contentwill drain away!10 Hours Service - In-Line FilterIf the boom is equipped with In-Line filters, unscrew the filter bowl toinspect and clean the filter. When reassembling, the O-ring should begreased.Alternative filter meshes are available. See the section “Filters” onpage 203.± WARNING! Be careful not to splash out liquid, when unscrewingthe filter bowl.Always wear protective clothing and gloves, before servicing thefilter!
