3 - Description50Sprayer UseThe HARDI sprayer is for the application of crop protection chemicals and liquid fertilizers. The equipment must only be usedfor this purpose. It is not allowed to use the sprayer for any other purposes.If no local law demands that the operator must be certified to use spray equipment, it is strongly recommended to betrained in correct plant protection and in safe handling of plant protection chemicals to prevent unnecessary risk for personsand the environment, when carrying out your spray job.Steel FrameVery strong and compact steel frame / chassis with a strong chemically resistant and weatherproof electrostatic lacquercoat. Screws and bolts etc. are made of stainless steel, or they have been Delta/Magni-treated to resist corrosion.TanksThe tanks are made of impact-proof polyethylene, resistant to UV radiation and chemicals.The main tank has a purposeful design with no sharp corners for easy cleaning.The filling hole is placed so it can be accessed from the platform. This ensures an easy access for the filling and cleaning ofthe tank etc. The sprayer may also be equipped with a TurboFiller, a rinsing tank and a clean water tank. A large, easy-to-readtank level indicator is placed beside the platform, where it is visible from the tractor cabin and in the work zone of the sprayer.Nominal main tank contents are 1800 or 2200 litres.LifetimeThe expected lifetime for the sprayer is 20 years.To obtain this successfully, these instructions should be followed:• All service and maintenance work must be completed in due time• Repair any damages parts as quickly as possible• Replace or change spare parts as instructed• Only use original HARDI spare parts. ATTENTION! If using acidic liquid in a spray boom with stainless steel piping, this will shorten the lifetime significantly,as these pipes are not acid-proof. Risk of corrosion and leaks.
