6 - Maintenance123Lubrication and Oiling Plan - PTOThe amount of grease to be applied is mentioned in grams (g). Test your grease gun to see how many grams it supplies, forexample after 5 strokes. ATTENTION! The correct amount of grease applied at the intervals is important. Too little or too much grease willshorten the lifetime of the PTO.The grease points and amount of grease to be applied are shown in the pictures below together with the intervals.Standard PTO for tractor and sprayerGreasing the PumpThe pump is greased as follows:• Factory greased:300 g grease into each lubrication point (A).• Normal operation:Greasing every 50 hours with 30 grams of grease into eachlubrication point (A). See also the section“50 Hours Service”in this book.• After disassembling the pump (diaphragm renewal, etc.):Greasing with 200 grams of grease into each lubricationpoint (A). ATTENTION! In order to prevent excessive wear, it is important touse a recommended lubricant! See the section “RecommendedLubricants” in this book. ATTENTION! The pump MUST be stopped during greasing!A-50 A-50B-50 C-50C-50Tractor Sprayer
