2 - Safety Notes41Service and MaintenanceAlways reassemble all safety devices or shields immediately after servicing.After a longer period of standstill, the sprayer must be inspected by a qualified operator. Contact your HARDI dealer for moreinformation.Repair work in the main tank must only be carried out by a specialized workshop.Do not attempt to enter the tank.Access to the rinsing tank must only take place with the spray boom in transport position, and after it is verified that thetransport locks are engaged.Regularly check the nuts and bolts for firm seating and retighten them as necessary.If electrical welding is used on the tractor and on the attached sprayer, disconnect the cable to the tractor’s generator andbattery before carrying out electrical welding work on the tractor and on the connected sprayer. Remove all inflammableor explosive materials from the area to prevent fire.Pressure test the spray functions with clean water prior to filling with chemicals.Refrain from dismounting hoses, pipes, or any equipment, if the sprayer is in operation.Stay below the maximum speed (rpm) suitable for the PTO shaft.When replacing spare parts, use suitable tools and personal protective equipment.Spare parts must at least meet the specified technical requirements of HARDI. This is ensured through the use of genuineHARDI spare parts.
