5 - Operation117Outside Cleaning - Use of External Cleaning DevicesUse the External Cleaning Device to wash everything on the outside of the sprayer.1. Unroll the hose from the reel.2. Set the pump speed to approximately 250 rpm.3. Open the left side locker.Set the suction valve for “suction from rinsing tank”.The pressure valve needs no specific setting.4. Open the right side locker.The external cleaning valve is closed (position A).Turn the handle to position B. Use the spray gun connected to thehose reel for cleaning the sprayer outside.Turn the handle to position C. Use the spray gun nearby forcleaning the EasyClean filter and CycloneFilter.5. After cleaning, close the cleaning valve (position A).Close the side lockers.6. Roll the hose on the reel again. ATTENTION! External cleaning using the spray gun is onlypossible with water from the RinseTank, which have beendirected through the main tank. To avoid using concentratedchemical mix from the main tank to clean the sprayer on theoutside, do a complete main tank cleaning before attempting touse the spray gun!If the safety valve is activated, then lower the PTO speed tominimize the amount of rinsing water being lost into the maintank.If the sprayer is cleaned with a high pressure washer, lubricationof the entire machine is recommended.÷ NOTE! Your sprayer might differ from the picture.
