3 - Description16Liquid SystemPumpDiaphragm pump with 6 diaphragms, model 363 or 463.Standard = 540 rpm (6 splines shaft). Optional = 1000 rpm (21 splines shaft). The design of the diaphragm pump is simple,with easily accessible diaphragms and valves, which ensure that liquid does not contact the vital parts of the pump.Valves and SymbolsThe possible functions of valves are distinguished by coloured identification on the function labels. The modular valvesystem facilitates the addition of optional extras on both pressure side and suction side. A function is activated by turningthe handle towards the desired function.μ ATTENTION! Only the functions used should be open - always close remaining valves.μ ATTENTION! If a valve is too tight to operate - or to loose (= liquid leakage) - the valve needs to be serviced. Please see“Adjustment of 3-Way Valve” on page 87 for further information.Pressure SmartValve (Green Symbols)This valve is to select which function the pressurized liquid from thepump will be routed to.The active function is indicated by the indicator. The handle is turned sothe indicator points to the label for required function. If handle is turnedto a position without label (unused function) then the valve is closed.Suction Valve (Blue symbols)This valve is to select suction from main tank or from the rinsing tank.The handle is turned so the label for required function is directed to theindicator. If handle is turned to vertical position (indicator not pointingat a label) then the valve is closed.Agitation Valve (Green symbols)With the adjustable Agitation valve it is possible to combine sprayingwith a high volume rate at high pressure with agitation at the same time.This is controlled continuously by the valve: The valve is marked with anarrow on the disc that indicates the amount of liquid that passesthrough the valve.• Handle is turned to a position near the tip of the arrow: Only asmall amount of liquid is allowed to pass the valve resulting to alesser extent of agitation.Main tank SprayingIInternal tank cleaning(Rinsing nozzles)(optional)Pressure draining (optional)or TurboFiller (optional)Main tank Rinsing tank (optional)
