34 OPERATIONFigure 8Once the menu appears on your video screen,use the ⁄/¤ buttons to move the on-screen ›cursor so that it is next to the channel that youwish to adjust. Then, use the ‹/› buttons9 to raise or lower the output level.When all adjustments are done, press the ⁄/¤buttons to move the on-screen › cursor so that itis next to RETURN TO MENU and thenpress the Set Button 8 if you wish to go backto the main menu to make other adjustments. Ifyou have no other adjustments to make, pressthe OSD button I to exit the menu system.NOTE: The output levels may be separatelytrimmed for each digital and analog surroundmode. If you wish to have different trim levels for aspecific mode, select that mode and then follow theinstructions in the steps shown above.Changing the levels by the trim adjustment asdescribed above will automatically change thelevel settings in the Output Adjust Menu (Fig. 7,page 25) correspondingly (and vice versa). WithStereo and Vmax modes the adjustment proce-dure described above is the only way to trim theoutput level (e.g. to match the Vmax level withother modes).6-Channel Direct InputThe AVR 7000 is equipped for future expansionthrough the use of optional, external adapters forformats that the AVR 7000 may not be capableof processing. When an adapter is connected tothe 6-Channel Direct Input £, you may selectit by pressing the 6-Ch Direct Input SelectorB. The 6-Channel Direct Input may also beselected by pressing the Input Source Selectorbutton ! on the front panel until the words 6C H DIRECT appear in the MainInformation Display W, and a green LEDlights next to 6 CH in the Input Indicators Ó.Note that when the 6-Channel Direct Input is inuse, you may not select a surround mode, as theexternal decoder determines processing. In addi-tion, there is no signal at the record outputswhen the 6-Channel Direct Input is in use.Memory BackupThis product is equipped with a memory backupsystem that preserves tuner presets and systemconfiguration information if the unit is turned offcompletely accidentally unplugged or subjectedto a power outage. This memory will last forapproximately two weeks, after which time allinformation must be reentered.* C H A N N E L A D J U S T *F R O N T L E F T : 0 d BC E N T E R : 0 d BF R O N T R I G H T : 0 d BS U R R R I G H T : 0 d BS U R R L E F T : 0 d BS U B W O O F E R : 0 d BR E T U R N T O M E N UOperation