7. To delete a power-on password, select Delete Power-On Password. Ascreen warning you that any existing power-on password will be deletedappears. Press Enter to continue.8. Press Esc twice to return to the Configuration/Setup Utility program menu.9. Select Save Settings from the Configuration/Setup Utility program menu;then press Enter and follow the instructions on the screen to exit from theConfiguration/Setup Utility program.Using an administrator passwordSetting an administrator password deters unauthorized persons from changingconfiguration settings. If you are responsible for maintaining the settings ofseveral computers, you might want to set an administrator password.After you set an administrator password, a password prompt appears eachtime you try to access the Configuration/Setup Utility program. If you typethe wrong password, you receive a message telling you so. If you type thewrong password three times, you must turn the computer off and start again.If both a power-on and administrator password are set, you can type eitherpassword. However, in order to change any settings, you must use youradministrator password. If you enter the power-on password, you will only beable to view limited information.Setting, deleting, or changing an administrator passwordAn administrator password can be any combination of up to seven characters(A-Z, a-z, and 0-9).To set, change, or delete an administrator password:1. Start the Configuration/Setup Utility program (see “Starting and using theConfiguration/Setup Utility program” on page 29).2. From the Configuration/Setup Utility program menu, select SystemSecurity and press Enter.3. Select Administrator Password and press Enter.4. To set or change an administrator password, type your new password andpress the Down Arrow (↓). Type your new password again and press theDown Arrow (↓).5. At Change Administrator Password, press Enter.6. In the Power-On Password Changeable by User field, select Yes or No.(If you select Yes and an administrator password is set, the power-onpassword can be changed without having to enter the administratorpassword. If you select No and an administrator password is set, thepower-on password cannot be changed unless the administrator passwordis entered.)7. In the Require Power-On Password on Warm boot field, select Yes or No.Continue at step 9 on page 37.36 User Guide
