After you change an option and restart the computer, the following screenmight appear.POST Startup Error(s)The following error(s) were detected when the system wasstarted:162 Configuration Change Has OccurredSelect one of the following:ContinueExit SetupNote: Depending on the configuration changes that occurred, the errormessage you see might be different from the one shown here. If thepreceding screen appears, select Continue until you reach the programmenu (see “Chapter 4. Using the Configuration/Setup Utility program”on page 29).If the preceding screen does not appear, use the program to configure yourcomputer. For more information, see “Chapter 4. Using theConfiguration/Setup Utility program” on page 29.Configuring startup devicesWhen your computer is turned on, it looks for an operating system. The orderin which it searches devices for the operating system is the startup sequence.After adding new devices to the computer, you might want to change thestartup sequence. You can use the program to configure startup devices. See“Changing the primary startup sequence” on page 39.68 User Guide
