| Step 7| (from step 6 on page 2-2330-7)| 1. Find the Fibre-Optic Extender at the other end of the link.| 2. In the next step, you are going to disconnect the fiber optic cables. Before you do so,| note the identifications of the fiber optic cables to ensure that you reconnect them| correctly later.| 3. Disconnect the fiber optic cables 1 from the Fibre-Optic Extender.| 4. Find the wrap cable and adapter assembly that is provided with the Fibre-Optic| Extender.| 5. Remove the wrap cable and adapter assembly from its plastic bag.| 6. If the wrap cable and adapter assembly has a protective cover at each end, remove| those covers.| 7. Disconnect the wrap cable 2 from the wrap adapter 3.| 8. Connect the wrap cable 2 to the connectors of the Fibre-Optic Extender.Chapter 2. Problem Determination Procedures 2-2330-9

IBM 7133 Series Service Manual