IBM 7133 Series Service Manual

Step 8(from step 4 on page 2-2010-2, and step 6 on page 2-2010-3)| Have you been sent to this MAP from an SRN?NO Go to step 9.YES Go to step 12 on page 2-2010-5.Step 9(from step 8)Have the system diagnostics or problem determination procedures given you anSRN for the 7133?NO If the system diagnostics are available, go to step 10. If the system diagnostics are not available, but the stand-alone diagnosticsare available:1. Run the stand-alone diagnostics (see “Installing SSA Extensions toStand-Alone Diagnostics” on page 2-1).2. Go to step 10. If neither the system diagnostics nor the stand-alone diagnostics areavailable, go to step 12 on page 2-2010-5.YES Go to “Service Request Numbers (SRNs)” on page 2-2.Step 10(from step 9)1. Run the diagnostics in Problem Determination mode.Note: Do not run Advanced Diagnostics; otherwise, errors are logged on other usingsystems that share the same loop.2. Go to step 11 on page 2-2010-5.2-2010-4 7133 Service Guide