IBM 7133 Series Service Manual

Step 5(from step 3)Are you at this MAP because you have found an hdisk that has no associatedpdisk?NO Go to step 6.YES 1. Give the cfgmgr command.2. Run the Configuration Verification service aid again.3. If the problem remains, a software error has probably occurred. Call yoursupport center for assistance.Step 6(from step 5)Are you at this MAP because you have found a pdisk that has no associated hdisk?NO Go to step 8 on page 2-2010-4.YES 1. Run diagnostics in System Verification mode to the pdisk.2. Go to step 7.Step 7(from step 6)Do you have an SRN?NO The problem might have occurred because the formatting of the disk is notcompatible with the using system. (Probably, the disk has been formatted on adifferent type of using system.)1. Format the pdisk.2. Give the cfgmgr command.3. Run the Configuration Verification service aid again.4. If the problem remains, a software error has probably occurred. Call yoursupport center for assistance.YES 1. Go to “Service Request Numbers (SRNs)” on page 2-2, and follow theactions given.2. If the problem remains, a software error has probably occurred. Call yoursupport center for assistance.Chapter 2. Problem Determination Procedures 2-2010-3