IBM 88631SU - System x3850 - 8863 Installation Manual

Also see for 8863 - eServer xSeries 366: Service guide Service guide Installation guide Problem determination and service guide

Contents

Statement 5:CAUTION:The power control button on the device and the power switch on the powersupply do not turn off the electrical current supplied to the device. The devicealso might have more than one power cord. To remove all electrical currentfrom the device, ensure that all power cords are disconnected from the powersource.12The server can be turned off in any of the following ways:v You can turn off the server from the operating system, if your operating systemsupports this feature. After an orderly shutdown of the operating system, theserver will be turned off automatically.v You can press the power-control button to start an orderly shutdown of theoperating system and turn off the server, if your operating system supports thisfeature.v If the operating system stops functioning, you can press and hold thepower-control button for more than 4 seconds to turn off the server.v If the server is connected to an Advanced System Management interconnectnetwork that contains at least one server with an optional Remote SupervisorAdapter II SlimLine installed, the server can be turned off from the RemoteSupervisor Adapter II SlimLine user interface.v If an optional Remote Supervisor Adapter II SlimLine is installed in the server, theserver can be turned off from the Remote Supervisor Adapter II SlimLine userinterface.v If the Wake on LAN feature turned on the server, the Wake on LAN feature canturn off the server.v You can turn off the server through a request from the service processor.Chapter 3. Server controls, connectors, LEDs, and power 29