Chapter 3. Monitoring assets 181Figure 3-6 renergy command flag descriptionThe renergy command remotely enables or disables Power7 energy features and displaysenergy consumption statistics and features status. The following input and output values areused: Command: renergy all Flags:– cappingmaxmin: Maximum and minimum power consumption values; is shown as“cappingmax” and “cappingmin” values.– cappingvalue: Power capping value setting; must be between the cappingmaxminvalues.– averageAC: Average AC power consumption.– averageDC: Average DC power consumption.– ambienttemp: Ambient temperature in degrees Celsius near the CEC.– exhausttemp: Exhaust temperature in degrees Celsius.– CPUspeed: Actual CPU frequency in MHz.# renergy -hUsage:renergy [-h | --help]renergy [-v | --version]Power 6 server specific :renergy noderange [-V] { all | { [savingstatus] [cappingstatus][cappingmaxmin] [cappingvalue] [cappingsoftmin] [averageAC] [averageDC][ambienttemp] [exhausttemp] [CPUspeed] } }renergy noderange [-V] { {savingstatus}={on | off} | {cappingstatus}={on |off} | {cappingwatt}=watt | {cappingperc}=percentage }Power 7 server specific :renergy noderange [-V] { all | { [savingstatus] [dsavingstatus][cappingstatus] [cappingmaxmin] [cappingvalue] [cappingsoftmin] [averageAC][averageDC] [ambienttemp] [exhausttemp] [CPUspeed] [syssbpower] [sysIPLtime][fsavingstatus] [ffoMin] [ffoVmin] [ffoTurbo] [ffoNorm] [ffovalue] } }renergy noderange [-V] { {savingstatus}={on | off} |{dsavingstatus}={on-norm | on-maxp | off} | {fsavingstatus}={on | off} |{ffovalue}=MHZ | {cappingstatus}={on | off} | {cappingwatt}=watt |{cappingperc}=percentage }Blade specific :renergy noderange [-V] { all | pd1all | pd2all | { [pd1status] [pd2status][pd1policy] [pd2policy] [pd1powermodule1] [pd1powermodule2] [pd2powermodule1][pd2powermodule2] [pd1avaiablepower] [pd2avaiablepower] [pd1reservedpower][pd2reservedpower] [pd1remainpower] [pd2remainpower] [pd1inusedpower][pd2inusedpower] [availableDC] [averageAC] [thermaloutput] [ambienttemp][mmtemp] } }renergy noderange [-V] { all | { [averageDC] [capability] [cappingvalue][CPUspeed] [maxCPUspeed] [savingstatus] [dsavingstatus] } }renergy noderange [-V] { {savingstatus}={on | off} |{dsavingstatus}={on-norm | on-maxp | off} }
