| 
188 IBM Power Systems 775 for AIX and Linux HPC SolutionFigure 3-9 lsvm command flag descriptionThe lsvm command lists the LPARs I/O slots information and CEC configuration. Thefollowing input and output values are used: Command: lsvm Flags:– -l: Detailed output. Outputs:[no-flags]{: ////[...]}: PendingPumpMode=,CurrentPumpMode=,OctantCount=:{OctantID=, PendingOctCfg=,CurrentOctCfg=,PendingMemoryInterleaveMode=,CurrentMemoryInterleaveMode=;[...]} Designations:– PumpMode: The pump mode value includes the following valid options:• 1 - Node Pump Mode• 2 - Chip Pump Mode– OctCfg: LPAR configuration per octant. The octant configuration includes the followingvalid options:• 1 - 100% to 1 LPAR• 2 - 50% to 2LPARs• 3 - 25% to 1 LPAR and 75% to 1 LPAR• 4 - 25% to 4 LPARs• 5 - 25% to 2 LPAR and 50% to 1 LPAR– MemoryInterleaveMode: Memory configuration setup per octant. The MemoryInterleaving Mode includes the following valid options:• 0 - not Applicable• 1 - interleaved• 2 - non-interleaved# lsvm -hUsage:Common:lsvm [-V|--verbose]lsvm [-h|--help|-v|--version]PPC (with HMC) specific:lsvm [-a|--all]PPC (using Direct FSP Management) specific:lsvm [-l|--long] |
