IBM ThinkPad 340 Series Hardware Maintenance Manual

Also see for 360: Specifications Hardware Maintenance Manual Operating guide User guide Manual

Removing PCMCIA CardsAfter removing the PCMCIA cover, and filler plug if it isinstalled, you can insert or remove PCMCIA cards duringmost computer operations.To insert a PCMCIA card, perform the following steps:1. Insert the PCMCIA card into one of the availableslots, with the long row of pin sockets facing thecomputer and the label on the PCMCIA card facingup. When the card is in place, the blue eject buttonat the left of the slot pops out. Do not force the card.If the card does not fit into the slot, turn it over.Note: A Type III PCMCIA card occupies bothPCMCIA slots. To insert the card, aim its bottomridges at the lower PCMCIA card slot.2. Replace the outer cover over the PCMCIA slots.To remove a PCMCIA card, perform the following steps:1. Use a small pointed object such as the point of a pento press the blue eject button located to the left of thePCMCIA card slot.Note: A Type III PCMCIA card occupies bothPCMCIA slots. To remove the card, press the bottomeject button.2. Carefully slide the PCMCIA card out of the slot.3. If both PCMCIA slots are empty, replace the filler plugand replace the outer cover over the PCMCIA slots.Note: Do not remove PCMCIA cards while the system isin Suspend or Hibernate mode. If you remove a PCMCIAcard while the system is in either mode, you might loseconfiguration information. Or, if you remove a PCMCIAcard and insert another card, your system might notrecognize the new card.Product OverviewThe following table provides a brief overview of the systemfeatures.Feature DescriptionProcessor Intel** 486** DX2 25/50MHz or DX425/75MHz, with math coprocessor.Memory(Standard)4MB or 8MB (on the system board).Memory(Optional)4, 8, or 16MB SO-DIMM.BusArchitecture(Two Busses) Local bus for hard drive and video(with hardware line draw, BITBLT,cursor, and sprite support). ISA busThinkPad 701C/701CS (2630) 159